Automatic transmission oil additive RESURS Total AT

Automatic transmission oil additive RESURS Total AT

Lựa chọn bao bì:
50 g
Mã sản phẩm: 4701
150 g
Mã sản phẩm: 4702

Restoration and protection of automatic transmissions from wear.

Advantages

  • Restoration and antiwear protection of the automatic transmission
  • Protection from overheating
  • Protection during gear changes
  • Elimination of micro cracks

It is aimed to be added into the transmission oil

WHERE TO BUY
Mô tả
Hướng dẫn sử dụng
Tài liệu
Đại lý gần Bạn

How it works

Restorer RESURS is a lubricating composition for restoration and prevention of wear and tear of petrol and diesel engines, transmissions and gearboxes.

Restorer RESURS consists of nanoparticles of the alloy of copper, tin and silver, is poured into the engine oil system. RESURS doesn’t change the properties of motor oil, only uses it as a mean of delivery in most areas of friction and wear. The particles activate in areas of friction under high temperature and pressure and fill micro damages metal surface of the engine.

The film formed by RESURS has a porous structure, that is like a sponge holds the oil in the area of friction parts, preventing further deterioration.

In comparison with other products, RESURS forms a porous structure, which retains oil as a sponge and saves it in the friction zone.

ATTENTION! Use only when changing the automatic transmission fluid.

  1. Mix the contents of the vial thoroughly by vigorous shaking for 2 minutes.
  2. Add the contents of the bottle to the container (canister) with fresh automatic transmission fluid at the rate of no more than 1 bottle per 4 liters of fluid.
  3. Shake thoroughly the resulting mixture of automatic transmission fluid with RESURS AT until smooth for at least 2 minutes.
  4. Immediately start changing the fluid in the automatic transmission in accordance with the instructions for the maintenance and operation of the vehicle.
  5. ATTENTION! In no case RESURS AT should  be poured directly into the automatic transmission bypassing the stage of thorough mixing with the automatic transmission fluid. After changing the automatic transmission fluid with the engine running, it is necessary to alternately set the automatic transmission selector lever to all positions (P R N D) with a delay in each of them for one minute. After that, you must drive in a quiet mode for at least 20 km.

Attention! Failure to comply with the instructions for use of “RESURS AT” and the vehicle manufacturer’s instructions for changing the working fluid can lead to incorrect operation of the automatic transmission and its further failure.

Find nearest distributor in your country:  VMPAUTO distributors network .

Our products in web shops

Sam, Regional Manager
Order samples