Anti-sludge flush RESURS

Anti-sludge flush RESURS

Mã sản phẩm: 9601

RESURS Anti-sludge flush is a composition that will breathe freshness into your engine. With increasing mileage, degrading oil leaves more and more carbon deposits inside the channels, on oil scraper rings, and engine working cavities. This product effectively dissolves accumulated deposits, transferring them to a suspended state, easily removed when changing the oil.

 

Engine cleaning without overhaul. Just add in the engine oil!

 

 

WHERE TO BUY

Bao bì: 100 ml

Mã sản phẩm: 9601

Mô tả
Hướng dẫn sử dụng
Tài liệu
Đại lý gần Bạn

Professional Solution

There are a lot of flushes on the market and it is impossible to surprise with another product. However, they all have poor performance in the fight against heavy contamination. They are designed to keep the engine clean. But if problems have already appeared in the form of oil burn, only strong remedies can help. It is Decarboil.

  • Reduces oil burning up to 3 times

For deep cleaning of heavily contaminated engines, it is recommended to apply RESURS Decarboil twice, changing the oil each time after a flush cycle.

  • Dissolves but not peels off the deposits
This is important when cleaning heavily contaminated engines. Peeled-off deposits can lead to jamming of the oil system and oil starvation.
  • Releases oil scraper rings and channels

Struggles with the cause of oil burn. Contamination of the rings is inevitable – the engine burns fuel, and the combustion products settle on the rings.

Washing away deposits and varnish improves the thermal balance of the engine, which is the basis of its effectiveness and durability

Usual application

  1. Before use, withstand the composition at room temperature for 6 hours.
  2. Check the oil level and choose the correct dosage of the composition. A bottle of 100 ml is designed for 4-5 liters of oil. With a different amount of oil, the dosage is not more than 25 ml per 1 liter of oil.
  3. Warm up the engine to operating temperature, turn it off, open the oil filler.
  4. Pour the recommended dosage into old oil or new oil, flushing oil.
  5. For effective cleaning of highly contaminated engines, it is necessary to keep the engine work in the range of 1700-2300 rpm for 20-25 minutes.
  6. Switch off the engine and allow it to cool, for safely drain of used oil.
  7. After application in engines with a painted oil pan, it is necessary to verify the integrity of the paintwork, if necessary, remove the paint.
  8. Replace filter and oil.

Find nearest distributor in your country:  VMPAUTO distributors network .

Our products in web shops

Sam, Regional Manager
Order samples